on some of the cheaper 2 post lifts you have to manually pull out the locking pins to lower the ramp which is a pain of you don't have the car up...
on my astra the cap undid its self when I was driving and the oil went everywhere. just take it down the jet wash at the petrol station and hold...
id be tempted to peel off the 'pro weld' sticker in the first photo and see what underneath as it looks like its covering another name up.
just buy an aftermarket one. an ebay knockoff walbro will be more than adequate
you just need a decent bed/wood/imagination to get low cars on.
some trek that is. id do it for £850. but I doubt you would bite my arm off for that quote.
in an ideal world you would just replace the whole roof skin.
if your just welding a big patch in then you usually cant just use a sheet of flat...
I actually need to make some control dials to replace some plastic ones that keep breaking and are £8 each and I need 16 of them.
They need to be...
cheers guys I will look in to the couplers. I had hoped to be able to just buy a length of female rod.
is there anywhere you can buy the female version of this? or how do they make it?...
most of the graffiti people use montana cans. you can buy different spray pattern tips aswell
something like that. don't forget to buy a length of flex
they are all pretty much the same. warm the can in a bucket of hot water first.
and I bet its still better than some of the modern rubbish
can you drill it and insert a dowel and bond it back together?
how much did all that cost you? I need to make a new bench and it will be about the same spec.
id put the intake low down on one side and the extraction up high on the other side. and then as slim boy says one on the bottom left and the...
ive about 20 wheels that I want doing, for my track car and will probably use these guys,
they say its...
mine is a square room and big flat sheets so would be less of a nightmare.
keep us updated on how you get on, I had planned on the big sheet of...
what would happen if you put a bolt in the electrode holder of a stick welder and held it against a panel? would it weld it to the panel?
Separate names with a comma.