I have to disagree, asynchronous generation has no output frequency control, you get what you are given. They are synchronised by connection to the grid and the frequency is controlled by the synchronous generation such as steam or hydro. If there is too much asynchronnous...
A very little known point about renewable generation, hydro is the only one that is controllable, wind, solar, wave tidal etc are all uncontrollable, technically known as asynchronous. This makes it difficult to keep a grid stable, very much like driving a...
I'm surprised at the size of nozzles some of you use for car bodywork, I know that they would be too big for me, I use a 1 for 20 gauge and a 2 for 18 gauge steel, generally 20 is the outer panels and 18 is the structural sections.
Rcx, I would normally use a 5 for 1/8" steel, not...
although the Hoffman web site didn't have a reference to V2 or V3 I could see on a cursory visit , it did say this:-
"Hoffmann Brass Cage Bearings are first choice in industries such as petrochemical where unexpected failures can be catastrophic. Brass lends itself to...
another method is to use a Vee section or even the open jaws of a heavy vice and hammer the rod, which will bend as you hammer, just work your way along the bar. 8mm round bar is easily bent.
he is on You Tube and his video is still available from him.
Personally i do all my body work (hobby, not professional) with oxy acetylene but i also do have an AC\ DC TIG set as well. I beleive both produce a softer weld than MIG and of course welding without filler gives a flat...
I would suggest your point about water globules is more theoretical than practical.
Apparently the Ameriacn military use nothing else in their vehicles and Harley Davidson motor cyles also use it from the factory?
Incidentally the brand I use does state that it can be mixed...
I have used silicone brake fluid for what thirty years or more. I have just started restoring my old Jaguar MK 2 whch has been standing for 20 years and the brakes are still free.
Yes, there are people who say that it is not safe, cannot work, spongy brakes etc. Not in my...
Hello Board Tracker,
I may be wrong but i think that if there is any real wear scraping cannot rectify that. You can use a simple engineers metal rule and feeler gauges to assess the wear on the bed. If there is any the bed will need regrinding first. Scraping was done after the bed is ground...
how are you managing to snap drills? I suspect a less than ideal application, I presume with a hand held drill?
A greater explanation of what you are doing and on what meterial would help us help you?
I don't see any need for cobalt ones, I do a lot of stainless steel work and...
even after lead filling, you may need a small skim of plastic filler, to get a perfect finish, a small skim being the oprative word
To me the best thing of lead filing is that as it needs a completely clean base then there is no chance of any dormant rust re appearing which there...
while I have never seen the inside of my Avo meter, I wouldn't have thought that is fuse wire. More likely to be a resistance wire, but that's a guess.
I don't understand your comment about the fuse being in series with the battery, how else can you wire a fuse?