Ace, thanks Al!
Well this is an interesting one....we've been asked to put a stand together for a customer to use at the upcoming offshore Europe exhibition. It...
Thanks folks. There is no procedure, we're being asked to develop one for the customer and then run the production. Normally we do downhole stuff...
Maybe this is the kind of thing we should be looking at?...
Yes - 2Cr1Mo. Like I say I'm not sure what wire we should be using here. I just know it needs to be a low-hydrogen consumable and therefore solid...
I've used Laser Process for many jobs. You can register for their inline quote builder - upload your dxf and choose the material for an instant...
We've been asked to look at doing a single-vee butt weld in the horizontal on rotated pipe using a metal-core (low hydrogen) wire in F22. I'm...
Could be the Aberdeen-oil-bubble effect but Element (formerly Exova - or maybe it's the other way round) quoted virtually the same price. There's...
Code-a-weld... They sub-con the x-ray inspection out and it included a salt spray test. So yeah - expensive!
What we had was not as deep and was all over the surface rather than a straight line down the centre of the bead. They were also not as long and...
Sounds like moisture.... But if you try that & it didn't work we had a sort of similar problem with a Bohler flux core wire (Ni-alloy 625 - can't...
Okay cool... Sounds like a plan. Oli.
Hi folks, about to embark on making myself a powder coating oven (I've outgrown my existing domestic affair). My plan is to use 40x40 box section...
(speaking as someone who has a tested WPQR to ASME IX) It's a PITA....Brad is pretty much spot one with his temperatures. Pre-heat to 250 deg C...
Yes, we're already doing that for the prototypes but need a proper solution for production run.
Ah yes - hold not good....
Not sure how to answer that question.... If you think you can do this and have the capacity let me know and we can talk. The normal spring guys...
IMG_20190105_085022 by oliwb posted Jan 12, 2019 at 6:10 PMIMG_20190105_085017 by oliwb posted Jan 12, 2019 at 6:10 PMIMG_20190105_085012 by oliwb...
Something similar to this? Material is some grade of Stainless (I suspect X-750). I presume these start as flat spring steel, are put through...
Try Rambaldini Welding Services.... Jake's number: 07702 120686
Separate names with a comma.
