Will do pete. I was going to but had to spend a day taking up the old floor in the bedroom...a joyful task...not
Will do parm.
I will be doing a large concrete floor at my place. About 1200 sqf. This is 12 inches thick with mesh and multiple tie bars. As it's all hand work...
All the concrete floors I have done from garage floors to warehouse floors all have a double layer of mesh. 100mm from the top and a 100mm from...
I would let it settle for a few months. Then run a disc cutter through the cracks. Then grout them.
Spent this evening with the task of getting the machine nice and level. What a task. But it's done. [ATTACH]
Looks like a simple case of no steels/reinforcement.
Will do mate.
Thanks for the kind offer screwdriver but I will find a more suitable lump
Both axles on my plant trailer are braked
Cheers Brad. I have a hunt about and see what I can locate
I do like that big press
If any of you chaps are within the essex area who could supply a 500x500x20mm lump of steel plate that is actually flat could you...
Not for 20mm plate.
Look at it. I can actually pass my ruler underneath.....will have to source another lump as this bit is about as much use as a kick in the nuts...
A nice flat lump of plate .....not.
Is it to much to ask for. A flat piece. [ATTACH]
Also I will add four big rubber pads that are adjustable. This will help set the pad at the right level especially when I move the lathe in to the...
I done a rough up. The plate is almost a perfect size. I can use the left and right bolts to return two brackets from the plate. [ATTACH]
Yes. I have had a good look and found a slab of 20mm. Plus some heavy motor adjustment brackets that I can cut and shut shorter. [ATTACH]
After a lot of thought I have decided to make a separate stand for the motor.. looking through my materials I have only got 5mm plate..could of...
Separate names with a comma.