The 300sm is both constant current and constant voltage capable depending which mode it’s in. It has short arc puddle control when used in gma...
I only have 1.0mm wire but tend to weld with 90% low range set switch to dip and between 3-4 on wire feeder. When in high range set wire feeder...
I can still buy fuel for my model engines online which contains between 60 and 80% methanol depending on oil content and performance enhancers
I have one, but software can be as complicated or as simple as you want to make it. I used corel draw when i first had the machine as it uses...
Connect the three phase wires to the terminals marked
Connect an earth to the motor casing as well and leave the other terminal as it...
Not having a go either, just a little vague as you said a picture would help clarify
But can provide a 'netural' to run 240v electronics between the star point and a phase
If it 415v out then yes
That's the star point connection as its potentially wired for 415v
I think you need to change it to delta to be able to run it at 240v
If the hose is nylon with od's of 4mm and 6mm how about two push fit hose connectors.
One female bulkhead to 6mm hose...
The newer version is Arcon, according to there website one of the orginal co inventors of the powcon is still involved
How old is the resin and catalyst?
The place I got mine don’t have any in stock but I see farnell have some Use this to search
Tried to post a link but it’s...
Fusion does offer local file storage but you have to use the export option rather than save, at least with the hobby license Not sure if the...
I may not be correct on this but it does look like america has paint booths that run at positive pressure or did.
Well not exactly :laughing:, but is surprising the amount of smoke that comes out of the grills
Yes that’s the culprits, it seems rifa caps do fail. I did replace mine without any issues
This has publication is aimed at spraying isocyanates but recommends negative pressure http://www.hse.gov.uk/pubns/priced/hsg276.pdf
This is sub £50 and something Ive been thinking about getting my self uni-t ut210e. Not sure on accuracy or durability. Quite a few links on...
It was the first one I found on the lechler site rather than searching for anything specific
Separate names with a comma.