i thought it was miller who bought them out
60 amps,especially on tig,should be okay.
if you can use the upslope function even better.
but its still a Chinese inverter,so it could blow
gas cooled torch
water cooled torch
haven't seen it before but a nice touch
i don't know why you are being treated with needless suspicion and condescension
but to answer your question,a 35-50 connector can handle up to...
tungstens don't like active gasses
have you welded much with a wirefeeder and cc?some feeders work better than others but I could be preaching to the choir!
a customer of mine...
I wouldn't recommend one if you did much mig welding.
5kva auxiliary for a single phase mig isn't much,itll run the kemppi but does not meet its...
cheaper sets often don't incorporate an air pressure sensor
it was over here a while ago,didnt sell too well besides track cars
stink of vodka follows the car
it depends on the alternator what to look for
is it ac welding or dc?
thyristor controlled or cam switch selector for power settings?
a photo or...
its not an easy fix,the board really needs looking at by somebody
'constant gas feed and live arc'
Does that mean you have no wire feed?
a 30 kva might do,but to be exact you would need to know what kva the welder and hp/kw of the punch,plus anything else that might be used
delusion jealousy and paranoia mr secret is suffering from
both Stel (161 I think) and Kemppi (minarc 151) have quoted in the last couple of years cheaper replacement new units than main boards,to two...
Jabberwocky rods = doesn't mean cheap rods.good rods but not as easy to use as others for a root.
Jabberwocky gaps = a good gap for a fitter is not the same as...
they can be perfectly fine 6013 rods,any major brand. but you cannot manipulate them like a cell. if your angle gets too far off, slag.
rc or rr...
have you arc welded pipe professionally hugh?
if you cant weld with whats given to you,you cant weld,full...
this type are all that's needed,the 10 inch version cuts 70sq very easily.90 no problem
keep going with what you have
you need to be able to weld with whatever rod you are handed
a slight amount of cellulose makes a lot less...
Separate names with a comma.