Dexion front lip on 12" shelf works ok.
Use plastic pipes.
Many years ago I worked with a man who brought a cast iron frying pan into work. he heated the pan to cherry red then threw salt onto the insides...
Get to the scrappies, lots of cars have adjustable tensioners for the timing belts.
Brake cleaner works.
I would get rid of that belt and replace it with an endless belt. if the belt can not be put on without splitting it glue the ends together in situ.
Base is from a Deckel engraver.
Byker Grove Its a fairy tail They couldn't even speak proper Geordie.
I hade a bad accident in 1960ies on a metal planer. The table was moved by a fast and loose pulley. The loose pulley moved and became a fast...
Spuggies in Geordie land.
Buy a British, European or a American machine , much better than far east machines.
Loved the Hendey lathe vid. I had one for many years I wish I had kept it especially for screw cutting.
If you disconnect the start cap you may be able to start it by spinning the rotor in any direction.
20uf a lot smaller than the original 130uf.
What is written on the cap?
Starting windings go to2&6
Run windings go to5&7
mains supply go to1&3
The starting windings usually have a higher resistance than the run.
Doesn't matter what way the wires are on AC caps. if there is smoke coming out it will probably be a starting cap, the 130 uf for a 1/2 motor...
You need to swap over the starting winding wires.
Jar lids are not cut on a lathe but usually rolled between two rollers. thousands can be produced in a short time. You may be able to make one if...
You have a floor, I've got one somewhere.
Separate names with a comma.