Search results

You need the bottom connections

It looks like you have got the main live neutral running through the auxiliary block and not through the contactor

I use heated up waxoil

I tend to use mild steel or brass, and grind the mushrooms off now and again. On seized pins I normally weld the drift on the pin and get out the 14lb

Did the original contactor have any capacitors across the contacts?

No problem. I use 2x 8.8 m10 bolts through chain links to lift the front axle of 6 ton tractors and move them into the workshop.

Just a large circular brick soakaway tank.

Has anyone used polybed soakaway pipes ?. They seem a good price compared to standard perforated pipe and gravel. My 60 year old brick soakaway tank is slowly getting worse at draining and I need to lay some soakaway pipes from it.

I hate windows 10 with a passion. Windows 7 was fine why change to something so rubbish

If you're welding stuff you don't need to be millimeter perfect

We need pictures to see if this is a perk or a chore

The fumes build up after an hour or two

Yes it's much easier to cut accurately with a 9" far better than a 4 1/2"

I cut 70% of my metal with a 9" angle grinder. Just buy a cheap one and some thin cutting discs

Worm drives need a special oil because of the sliding contact between the teeth.

I would use an EP oil in that

A manager on a poultry farm I work on kept getting warned for doing over 70 in a 30 limit. He eventually went into the head office to sort it out and the tracker was recording him on a 30 mph road that he was driving over a bridge on a duel carriageway.

Seen this on another forum. And there was some interesting answers so I thought I will try it here. What's the best part or perk of your job? Mine is that Iam never doing the same thing for more than a couple of days at a time. My job varies from welding, engine rebuilding, servicing tractors/...

I needed a 4nm torque wrench the other week to set the bearing preload on a tractor rear axle shaft.

Have you thought of using hydraulic swivel fittings