Search results

Some of the modern servos are up to 4:1 assist ratios, not sure if you have discs on the front but drums are normally ok without a servo but disc brakes require a lot more force

You need to ask your boss for the duration of your speeding, you can on most trackers get glitches but these are easy to spot as the duration of the speeding will be a few seconds or less. Generally only give people a talking to if the speed shows for half a minute or more is the rule we...

I do not think N is National Identity, it is National Insurance. The form is probably written for those who issue ID cards, you could add a passport number instead and see what happens

It depends upon your setup, for me 50:50 is still too thick, I find 60:40 works best with the spray setup I have as 50:50 tends to end up with a surface texture. Last coat goes on with extra thinners at about 80:20 to give a nice smooth finish, but it is more difficult to avoid runs. This is...

I just stuck a scaffold pole through mine and used a couple of builders tressels, did not look as fancy but was cheap and only took a few mins to do, I did attach a pole with counterbalance weight to make it easier to move / position

Personally I would look at a proper charging point, at 6A your car will take a complete day to charge, I had a proper charging point installed and did not regret it at all, much easier that messing around with a 13A socket, which are not really up to the job of being used to charge electric cars...

I fitted all mine as a floating floor with a 1/2" gap around the outside and have had no problems, still looks like new after 10 years

Cars in the UK use 2 different types of connector Type 1 - mostly Asian cars Type 2 - mostly European cars There is a Type 3 but is not used in the UK (it is a fully shuttered design) The socket on the charger and the socket on the car do not need to be the same type i.e. you can get a type 1...

Problem is it often did not happen, plus hiring all the customs people needed to enforce everything was very expensive, better to take care of things at source

From an initial play I would say it is a very nice welder for the money and worth paying the bit extra over a very cheap one (mostly for the better leads). Bad points Came with an EU plug Good points Seems well put together Nice long (for the price) power cable Good quality leads / earth...

A business that does not charge VAT will normally still have some VAT component i.e. where they have purchased goods etc they will pay VAT on them and not be able to claim it back.

It can if you are a business, you can import and postpone the VAT payment, you can pay the VAT immediately, or if a temporary import have the goods in the country for 2 years without paying VAT - normally based just on the commercial invoice value. Import and export paperwork is actually quite...

To be fair what they are trying to do is ensure that the correct level of VAT is paid, the old system where people are supposed to declare what they have imported and pay the VAT clearly did not work and many items were purchased VAT free, how can a UL business compete with a low cost country...

With db normally 6db is doubling, but if you are working with a power then 3db is doubling. 3db is doubling of sound power, but our hearing response is not linear so it will not appear to be twice as loud to an individual.

For spraying I use an LVLP spray gun and a 2.5hp 50l compressor which can keep up with the gun. My paint spraying abilities are limited but I do not notice much difference between a siphon traditional gun and the LVLP other than having to keep stopping for the vompressor if I use a traditional...

If it has the proper safety systems the oil filled radiator will have a tilt cut off switch, so if you turn in on its side it will not work.

Trying to get the geometry correct is a nightmare, my father fitted a steering rack and even with a full workshop to make brackets and a number of attempts the end result was to go back to the recirculating ball as the modified systems just did not work properly and impacted the feel of the car.

PI insurance is an odd one, most insurances handle claim by who was your insurer at the time the poor workmanship arose i.e. if you made a bo-bo today but it was not noticed for 3 years, it would be the people that insure you today that would be asked to pay. PI insurance goes by who is your...

This should not be interpreted as legal advice and no reliance should be placed upon the following: There are 3 main groups of people involved in most companies Members (sometimes called investors or incorrectly terms as owners) - these are the people that put the money in to a business but...

It depends if you are an LTD or a sole trader, as an LTD your personal property is protected (unless you have given loans / guarantees to the bank or customer) Also note that Public does not cover equipment you are working on, so All Risks Insurance (which does not actually cover all risks!)...