If you don't need high pressure or a bulky hose look for pnuematic piping.
Interesting thread this.... Rebar should not be rusty before concrete is placed, neither should it be contaminated with oil, paint, etc. Steel...
The pto rating is probably engine peak power, but that will be at far higher revs than when the pto is active.
I use one of their industrial towers at work. Apart from having to be very sure it goes up and stays square and level it has been very good. If...
There should be a bridge plate there as standard. EDIT: Look it up before posting !! - saloons with the v8 have a reinforcer as standard, looks...
I presume you mean there is an orange led under the clear plastic where the cable goes in. Very common on proximity sensors to have an indicator...
It's telling us something about the global economy when a 4 year old ship is not worth salvaging in one piece.
I believe the answer to that is - not these days
Fibres have been mentioned a few times, are people refering to steel fibres or plastic fibres ? Steel fibres are an alternative to traditional...
No, if you demonstrate that you made reasonable effort to employ a competent contractor then the fault reverts back to the contractor. If you can...
Read the LOLER and PUWER regulations. I'd trust a LOLER inspector far more than some MOT inspectors I've witnessed working.
Usually the oil pressure is higher than the water pressure so the oil leaks into the cooling system, quite messy.
Sorry, was aimed more at myself. I'd found out their similar to an IEC type and was disappearing down that rabbit hole when Seadog posted the...
Search by usage rather than part description :doh:
Personal prejudice I'm afraid but RS are going downhill rapidly.... Too many "own brand" products of uncertain quality and the technical...
If it retracts into the dash when turned off there might be a way to get it to retract when on.
Only hobby use admittedly but I've got 3 Black and Decker P54xx Professional series still going after 35 years. Just had to order brushes for one...
https://www.bbc.co.uk/news/world-europe-51680049
I don't know what you've seen.....:dontknow: Hot rolled steel sections come in many forms. "H" sections are normally of the same width and depth...
Too late now but you should have put those steel roof beams in rolled 90 degrees, using them as "H" sections wastes a lot of performance.
Separate names with a comma.
