Maybe in Germany. But order it before the V.K. leaf the EU
Herewith the manual of the ESAB LAE-315. I have no manual of the wirefeed unit
If you make a connection between B and F on the 8 pol. connector,...
If you have a seralnumber you can see when the machine is produced.
I find this from a 160 dc. It looks like the same
R10 and R14 are both is 6,8 Ohm. R10 is 10 Ohm. R3 is 1K. R1 is 22 Ohm
First you can try to make a connection with a small wire between J anf K on the remote control connector. That must have the same results as the...
So far I know there is no gas flow switch inside this type (DTE-255))
Herewith the partslist of your board. You see the number of your board without components in the list with the parts.
That number you gave is a factory number from a board without components. A pc board complete ends mostly at --- --- 880.
Is it this board?
In this case you can allso use a standaard value of 27 Ohm and at least 16 Watt or more.
I din't reed the papier. Sorry. The resistor is 24 Ohm and 16 Watt. There must be an empty place on the board I think.
That is a resistor. I can reed 16 Watt. Turn the resistor a littlebit. So we can se the value of the resistor.
The version in the book I send you is a version where you can connect a footpedal. Then you need a possibility to switch over from internal...
This switch is K19. You have no switch remote control (K33). The switch Tig-MMA hase no middle position so it's possible not good anymore.
If the switch is set to mma, can you weld with an electrode?
The official name is LTG-150. Herewith the manual.
Very good that you have solved your problems with this board. They are not simple. Good work and nice pictures.
Your PFC controller is broken. This is a complete white block on the PCB. This part is not seperatly to by. Only a complete board is available.
It's a NTC of 10 Ohms.
Separate names with a comma.