Read post 2 & 3
Agree with that. No resistors needed IF you have reliable understandable specs from the driver BUT if you haven't you can protect...
For the light output you need to translate the tube to lumens and then find lumen rating of LED at supplied values.
Then find actual wattage...
if you can't fill in the LED values and then mess with voltage that horse is digging it's heels in deep to be obstructive, especially when your...
Tail lights usually fail in 2 ways
1) adding the convenient extra earth pin fixes the earth pin in socket on car loom
2) LED failure - plenty of...
That horse can't drink
Just being awkward.
Also LED will draw no more than it required with a resistor in front so...
E9x was a step change
E36/46 are basically same suspension and tech end to end
Ironically electricals are very reliable and parts are reasonable...
Seriously can no one click the link that will draw it for you as a start.
Horse to water.
You should ALWAYS use resistors with LEDs
Plus, go look at the link.
M3 is my nice car bought in 2012
E36 94 325 and 95 328 are our daily transport and snow mobiles when required on summer tyres
(Unused tyre chains...
Look at circuit generated by link
Oh and forget fitters hiding parts, it's an engine. Form follows function.
keep runs of vacuum pipe and LPG from vaporiser to solenoids and...
Erm in the link as already said
Buy big old top spec cheap, run it cheap
And either have more disposable cash / better standard of living or savings which is still HQOL
^ Them still down to what I said earlier, design circuit
Then but a step down to match
Or go high on power / voltage spec and use those values in...
Put the voltage as supply voltage in and it'll just adjust the resistors to suit the drop required
I don't se the issue TBH
you know the LED...
The script in here is reusable but our own values in
I did the maths and the guy has LPG on everything now including his old 330 still
Looks like you did the maths
The filling issue is generally a HUGE misconception
For a start never go out the way.
You do big journeys you will...
Pop say 12v supply
And 30'leds in here
It hasn't taken the sample I worked and then push voltage...
Total draw for same brightness should be the same as supplying same to each BRB
Yeah earlier stuf eats its swirl flaps IIRC
My 2001 M3 just eats miles.
Separate names with a comma.