I mention a person who you saw in the video, Sunppapa, in Finland. I've never had the blocks move, the clamping faces a virtually parallel! The...
I made a video on regrinding Chuck jaw which might interest you.
Wi Fi is similar frequency to Micro Wave ovens, who's cooking who!
Thanks for under-lining the reason for peening, it can make a huge difference!
I recently made 2 Tangental tool holder, welded construction. One of the things I'd like to stress is the use of peening, (in this case with an...
A US ton is2000 lbs, UK ton, 2240lbs!
They are usually cast iron.
It's cast iron, better to silver solder or braze!!
For £143, I'd silver solder it back on and maybe add a screw down it's length!!
I have an M10, a comon failure is the stud that attaches the top of the scotch yolk to the ram pulling out of the cast iron. I ended up brazing...
By the way, I should have offered earlier, if you need me to measure anything like the détente ball , I'd be happy to oblige!
Bearing factors sell individual steel balls for bearings, buy a bearing ball online, put it into the heart of a barbecue, leave it until morning...
Might I suggest that you try the grinding paste on a piece of wood trick, what have you got to loose! It looks like the sleeves were just a touch...
First rule, check clearance, if it clears, it's OK, taking out the gap piece for nothing is a waste of time, on my Edgewick, it's a heavy lump!
The two W20 sleeves I have screw on all the way easily!
Somebody beat me to it! I went through the same thing a few years ago!Schaublin W20 collets! RG is in Belgium, I'm in France I bought 2 threaded...
Separate names with a comma.