It was the batteries. All working ok now.
This has gone a bit slower than i thought.
The two front rollers were a bit out, so had to fiddle about a bit to get them perpendicular.
Thanks for that. I couldn't find anything earlier.
Looks like the batteries need changing.
When i got my optrel i chucked the instructions away with the packaging as i was never going to need them:doh:
Today i noticed a green led...
I use the GAP IID on my D3
I put a "universal joint" on mine....but it seemed to leak, so went back to the original fitting.
I think it was "silverline" though, so that...
They are Torx screws......can't remember the size. If i remember right there are a few on each side.
There is one screw under the door hinge which...
I had a leak on mine and had to take it apart to tighten things up a bit.
The qr coupling screws straight into the gas valve.
I used a filter from Halfords on my IR 30
It's still working ok after 10 years
I've used my M-pro 252 on aluminium.
Bought a 3m torch and teflon liner with the right tips.
Put it all together, set the welder for aluminium and...
A lot of containers now have "tabs" welded to the inside hinge part of the door.
If the hinges are cut it won't pull open.
I use a small (250kg) pull lift quite a bit, to wrestle bits of steel into the right place.
You can get paintball claymores.
I originaly used two 12" fans.
They gave up in the end and i now have one 14" fan from machine mart (blue one in the pic).
It's not too...
They look handy for the price.
It looks like it only has 1" of ceramic blanket....i think 2" is the usual and also some sort of coating on it to...
2 years and i finaly got round to using it.
250 hornady cases in about 15 minutes.
Used Tempilaq on 4 cases to set the timer then bunged all the...
Webley fulcrum pin circlip
A few years ago someone was removing a conveyor belt from a bit of quarrying equipment.
They were using a loading shovel to pull the belt with a...
I use one of the cheaper ones like this
I changed the spindle bushes for needle roller bearings and use it in a pillar drill.
I used to use it...
Get someone to sit in the back of your car with the sprayer and just drive round spraying the fence from the boot.
Separate names with a comma.