Them elga’s are pretty smooth with quite a soft buttery arc if I remember correctly. Very nice for subsequent passes or capping.
Bohler FOX EV50...
I can do the turning but can’t do the keyway.
It will be something from the TBI range, who ESAB acquired.
Probably push pull at 8 meters long or a auxiliary drive unit on a 5m lead with a...
Filarc 56S never gives the flattest profile.
Doubt they’re in a car, I think it’s a neighbour.
It’s a CNC Lathe.
Lab Type Coat/Smock.
make sure it’s EN 11611
We’ve had someone repeatedly dumping garden waste, dead plants, bags and crap in our field over the fence from the footpath. The footpath is our...
Job for @doubleboost
I can’t do jetways yet
New year I’d be up for it.
I’ve got to do quite a few courses this year so I’m gonna be skint.
Having used the parweld 160 multi process, it’s a good machine
Thanks to @Tom Orrow L
I’ve just ordered a 9”, a 5” and a die grinder.
You definitely don’t want mild steel for tool holders. I’d say EN16 as a minimum, EN24 would be better, then they could be hardened.
You want a...
Have you tried Acton bright steel?
Great tools. Love that ticker tape sound!
Had about 4 of this type in varying states of working order - maintaining one with spares from the...
When you’re doing real controlled tests it can get very laborious!
A PAMS unit makes things a fair bit simpler. They’re a lot more high tech now...
Rule of Roughly 1 Amp per Thousandth/Inch (Taking into account most 3/32” (2.5mm) rods won’t run nice past 90A.
125 / (3.2 • 3.1415) = 12.5A/mm2...
To expand on Al’s post above, for members who may not be aware, a smaller electrode for the root pass will normally give a greater depth of...
That will hold for a lot longer than the base metal welded both sides as it is.
Usually try to do a gas cut edge and get it bang on 90, then...
Separate names with a comma.