badabec
Forum Supporter
- Messages
- 1,867
- Location
- Essex UK
Hello, I have scraped off the old bituminous sound deadening and cleaned off 50 years worth of oil etc.
I intend getting as much of the engine bay back to bare metal, some areas will just have to stay with well adhered old paint.
Does the following sequence seem about right?
Abrade with 280 then 400 grit.
Degrease
Raptor epoxy primer
Raptor bed liner applied with roller
Cellulose primer
Cellulose top coat
I'm using cellulose as I don't have an air fed mask.
Do I need primer on top of the bed liner?
I intend getting as much of the engine bay back to bare metal, some areas will just have to stay with well adhered old paint.
Does the following sequence seem about right?
Abrade with 280 then 400 grit.
Degrease
Raptor epoxy primer
Raptor bed liner applied with roller
Cellulose primer
Cellulose top coat
I'm using cellulose as I don't have an air fed mask.
Do I need primer on top of the bed liner?