zerofoxjim
New Member
- Messages
- 8
- Location
- Scotland
Hi guys and gals, Been a long time lurker on the site!
Over the years, I have had many rust heaps that I wish I could have fixed...But never had the bottle to try and fix anything...So here I am!
I have a brand new welder, and im determined to learn the art....including making decent repair patches and doing a nice job.
Here is my problem: I know there is surface rust between the seams. Do I have to bust open all the seams to brush the rust out? or can I get away with using epoxy mastic to seal the lot up (after cleaning and patching the visible areas)
Thank you all!
Over the years, I have had many rust heaps that I wish I could have fixed...But never had the bottle to try and fix anything...So here I am!
I have a brand new welder, and im determined to learn the art....including making decent repair patches and doing a nice job.
Here is my problem: I know there is surface rust between the seams. Do I have to bust open all the seams to brush the rust out? or can I get away with using epoxy mastic to seal the lot up (after cleaning and patching the visible areas)
Thank you all!