Hi guys,
I am just in the process of wanting to convert some TIG torches I have laying around to work with my Thermal Arc AC DC 202 welder...
Now I have a WP26 which has a 2 pin connector for the trigger, and a shared gas/weld current thing (no dinse plug)... on the torch end there is a threaded fitting of sorts and i'm just wondering how I would go about installing a length of suitable cable in with some dinse connectors... the part that is the stumbling block is how this would attach at the torch conductor end?
I also need to try and convert the shielding gas inlet hose on another torch I have so that it will be compatible with the shielding gas outlet on the TA unit.
Any tips appreciated.
I am just in the process of wanting to convert some TIG torches I have laying around to work with my Thermal Arc AC DC 202 welder...
Now I have a WP26 which has a 2 pin connector for the trigger, and a shared gas/weld current thing (no dinse plug)... on the torch end there is a threaded fitting of sorts and i'm just wondering how I would go about installing a length of suitable cable in with some dinse connectors... the part that is the stumbling block is how this would attach at the torch conductor end?
I also need to try and convert the shielding gas inlet hose on another torch I have so that it will be compatible with the shielding gas outlet on the TA unit.
Any tips appreciated.