My first project whilst I'm learning. Made it up as I went along from 20mm box section, a piece of rod and some angle.
Cutting was done by hand, so I only my cut 45 degree corners on the top test.
Most of my welds look hideous but there is plenty of strength in them.
I'm going to rivet a spare piece of aluminium to the bottom tray to create a shelf - when I can find my tin snips.
Cutting was done by hand, so I only my cut 45 degree corners on the top test.
Most of my welds look hideous but there is plenty of strength in them.
I'm going to rivet a spare piece of aluminium to the bottom tray to create a shelf - when I can find my tin snips.