HughF
Member
- Messages
- 6,460
- Location
- Work: Dorchester, Workshop: Corfe Castle, Wife's place: Frome
oh dear... I think my 201 AC/dc isn't very happy...
It Goes to initiate the arc, the hf fires up then there's. dead short across the power supply (makes a 25kva Perkins go to full throttle, no I don't have any over current protection)... Cycle the power and it's 50/50 whether it will do it again or fire up okay.
Managed to get today's job out the door, engine drive is still out of action so I couldn't spool gun it. Nice big 8mm ally job, preheat, a 3.2mm tungsten and the set cranked right up.
It Goes to initiate the arc, the hf fires up then there's. dead short across the power supply (makes a 25kva Perkins go to full throttle, no I don't have any over current protection)... Cycle the power and it's 50/50 whether it will do it again or fire up okay.
Managed to get today's job out the door, engine drive is still out of action so I couldn't spool gun it. Nice big 8mm ally job, preheat, a 3.2mm tungsten and the set cranked right up.