Wendelspanswick
Member
- Messages
- 6,486
Using the pedal
set between 75 and 90amps on display
ignore all the slope and pulse functions
post gas to a couple of seconds
balance to the 10 o clock position
frequency at 12 o clock
Zirconiated 1.6mm tungsten
10mm stick out
7 or 8 cup
5 LPM Argon
Floor the pedal to start and then back off once pool forms.
set between 75 and 90amps on display
ignore all the slope and pulse functions
post gas to a couple of seconds
balance to the 10 o clock position
frequency at 12 o clock
Zirconiated 1.6mm tungsten
10mm stick out
7 or 8 cup
5 LPM Argon
Floor the pedal to start and then back off once pool forms.