shenion
Tool Pack Rat
- Messages
- 7,586
- Location
- Stone Mountain, GA USA
I have this Airco feeder working great . Only one problem.
The feed roller is only for 0.9 and 1.1mm (0.035 / 0.045") wire. I really would like to use 0.8mm and possibly 0.6mm (current 400A torch is 0.035-0.045 but should be getting a smaller one this week.) It has a Tweco connection, so I have lots of options here.
Basically, I need a 1/2" thick, 1 3/8 roller with a 3/8" hole drilled in center and 2 V-grooves cut. There is a woodruff key slot, but i can use a set screw if easier.
Probably would take longer to set up the late than actually do the work. I should be getting some 1-3/8" bar stock coming in by next week.
I will pay for time and shipping. I have a drawing with details. Prefer someone in the US to save shipping. Since there is no source for rollers on this 30+ year old feeder, I'm willing to pay a reasonable price. Checked the online places and they seem to not do simple projects.
Let me know if you are interested and the costs.
The feed roller is only for 0.9 and 1.1mm (0.035 / 0.045") wire. I really would like to use 0.8mm and possibly 0.6mm (current 400A torch is 0.035-0.045 but should be getting a smaller one this week.) It has a Tweco connection, so I have lots of options here.
Basically, I need a 1/2" thick, 1 3/8 roller with a 3/8" hole drilled in center and 2 V-grooves cut. There is a woodruff key slot, but i can use a set screw if easier.
Probably would take longer to set up the late than actually do the work. I should be getting some 1-3/8" bar stock coming in by next week.
I will pay for time and shipping. I have a drawing with details. Prefer someone in the US to save shipping. Since there is no source for rollers on this 30+ year old feeder, I'm willing to pay a reasonable price. Checked the online places and they seem to not do simple projects.
Let me know if you are interested and the costs.