Kent
Member
- Messages
- 9,992
- Location
- Bowland, Lanacshire,UK
Wrote previously about this portable plant that a neighbour owns. Doing some work over at his the other day and we had issues (turned out to be bad electrical supply from the mains) my own lorch batted through with a few stops from the power correction device but the jasic refused to do. More than give feeble attempts to light up a 3.2mm low hy. Not really the plants fault but needed to bring it back here for testing just to be sure.
Well I can report back that its a cracking little stick plant when fed the correct supply and will pad 3.2mm end to end and run a 4mm just fine at its top end (doubt it will do that end on end but it burns them).
Reported before that its a good little mig for light work and a carry round set but now confirming having tested the mma that it's a good buy for light duty commercial or heavy diy. Well worth the selling prices
Well I can report back that its a cracking little stick plant when fed the correct supply and will pad 3.2mm end to end and run a 4mm just fine at its top end (doubt it will do that end on end but it burns them).
Reported before that its a good little mig for light work and a carry round set but now confirming having tested the mma that it's a good buy for light duty commercial or heavy diy. Well worth the selling prices