just joined up thought i'd stick a couple of pics of my mini clubman project, just a bare shell atm, most of the metalwork done just the rear valance to weld on.
Used a gasless clarke 90EN for the welding, have had it for over 10 years now and is well hammered
before (expertly modeled by my dad )
after
and the last picture I took after fitting the scuttle
Once stuck back together and sprayed arden blue it's going to be powered by this
currently looking at a big welder so I can tackle welding the subframe (something around 150amp)
full build diary (for those interested) http://www.minifinity.co.uk/forum/viewtopic.php?f=186&t=75490
Used a gasless clarke 90EN for the welding, have had it for over 10 years now and is well hammered
before (expertly modeled by my dad )
after
and the last picture I took after fitting the scuttle
Once stuck back together and sprayed arden blue it's going to be powered by this
currently looking at a big welder so I can tackle welding the subframe (something around 150amp)
full build diary (for those interested) http://www.minifinity.co.uk/forum/viewtopic.php?f=186&t=75490