Photo needed - Oil Cooled Arc Welder

Does anyone have a decent photo of an Oxford or similar oil cooled arc welder that I could use in the arc welding tutorial? Can be a picture of an old/dirty/tatty welder with bare wires etc, but as clear and as large as possible would be great. I'd like to use it in on a page that discusses the pros and cons of different types of machine. The forum resizes images so best to email to malcolm at mig-welding.co.uk

PS - The tutorial is progressing. Snowcat and myself spent a day on it last week covered most of the welding on the flat section. We'll do another day once that's all been written up.

Will that do Malcom? I was down at youngs the other day, so have a few of the internals as well if you wish

That's smashing. Not often you see the old girls outside. Could you email me a full size copy (malcolm at mig-welding.co.uk).

I don't need photos of the internals, but would be interesting to see what's inside these things if you fancy posting them.

on it`s way Malc

I've got an old broken oil filled you can take apart if you want.

theres my recondition one if its anygood to you! excuse the sticker

Try not to forget the max arcs as well Malc if not for info from this site I wouldn't have known how to wire it up as it wasn't printed on the one I was lucky enough to get.
http://www.mig-welding.co.uk/forum/showthread.php?t=12751&highlight=maxarc
http://www.mig-welding.co.uk/forum/showthread.php?t=11726
I can always get it out and take better(well try) photos if needed.

I've emailed a couple of pics of my Pickhill. I'm about as good at photography as I am at welding, but they might be OK.

Welly

That's brilliant, thanks everyone. Should have enough now.

Unless... Don't suppose anyone has a photo of the circuit boards inside an inverter welder? Want to demonstrate that they run on magic rather than transformers.

EDIT > Thanks again everyone, I now have the photos I need.