NO NO NO NO.
Just had to change a motor in a renault traffic. What a see you next tuesday of a job that was.
The french make some lovely wine and some fantastic cheeses. But appart from a few excelent cars, it all garbage.
I just bought a transit 2.4 to camperise. The traffic and variants...
It sounds like you need a milling machine.
I suspect a router will be too fast for steel.
as was mentioned in earlier posts I think your best bet would be a carbide bur
You can base a percentage on an arbitrary mid point of 0 degrees. Consider the Fahrenheit scale with a different 0 and the kelvin scale with a absolute 0
i mate has just got an inflateable one. it has a 2KW heater and the destructions state its 18 hours to heat it up. so 36kWh to heat. since Electrickery is at approx 30p a unit that .3 x 36 to heat it up or £10 then there will be running cost on to for howerver you use it say another £3 per use...
the brass will give before the steel and the threads will strip making it less connected to the feed screw.
is the power feed engaged. If its engaged , can you dis engage it? With the power feed disengaged does the feed screw turn, with or without the nut? does the power feed drive shaft still...
mines on a 32A C curve with the welders and plasma cutter. I've never had a problem. i suspect the problem is the B curve. one is slightly less tolerant that the other. the other issue could be voltage drop. Is ths cabling between the two MCBs and the Compressors the same size and length? A...
I use wifi devices, which connect via my AP. that thas two networks. 2.4 and 5GHz. All the devices connect over the 2.4GHz network.
there is no need then for a "home hub", just an internet connection to make them work.
if you want ZigBee or Z-wave you will need a Home Hub device that the...