4th pic down you can just see the cupboard door to the left side of the sink, in there is a portable toilet.
Next to that are the waste and fresh water under the sink.
Eberspacher heater under the drivers seat { not included in the cost as I had it already)
2x110ah AGM batteries under the...
I filled all the cavities with recycled plastic insulation( even all the recesses around the windows took forever doh!)
1"kingspan on the floor, first layer over the rest of the van 2" recycled insulation followed by 7 layers of alloy reflective with 5 layers of insulation between each layer...
8-9mm Canadian redwood pine, no issues with it at all, the roof is well insulated so never gets really hot.
Best advice I can offer is make sure you do a very good job on the insulation, and design everything as if it has to survive an earthquake as that is what the van is doing to everything...
I converted a Boxer van to camper last year, L2H2, some pics.
Started like this.
Came out with this, well pleased :), lot of work way more than you expect wiring and insulation took ages to get it done right!.
All hand built mostly 3x2 and ply, have motor caravan on the log book...
Liquid damped PSI gauge 0-100psi, showing about 46psi in the pic, set to 50PSI now via the adjuster on the Procon gives me 1.5lt min back into the tank.
Here is a small 12v one I made out of PC bits/alloy expansion tank, and cheap HK HP pump......but so much noise from the pump.
Sitting on top of my Tweco.
I have a compressor fridge running in our Van, 40l in size, ours is on to keep a temp of 3c.
it uses 1 Amp per hour to run(total of 20min running time @ 3Amps when running per hour)
The fridge/freezer can go down to -20, no idea what it uses at those temps.
The 18w DDC pumps like the Lang d5 are no good, pressure to low to get the needed coolant through the head, I've tried them both.
This no good for you Hugh ...
This is very good, runs from 12-24v, being doing all the wiring in the new camper with it.
https://www.banggood.com/MINI-TS100-Digital-OLED-Programmable-Interface-DC-5525-Soldering-Iron-Station-Built-in-STM32-Chip-p-984214.html?rmmds=search&cur_warehouse=CN
Just make sure you buy a bigger tip...
Chris, my Lorch Tig at anything over 80HZ totally shuts down/trips out an a very good quality Victron solar charge controller, it takes about 10 min before you can get it to turn back on.
No way would I be welding with a pacemaker fitted. ( they are a meter apart)
@vwmark , look at the pics for info.
Only 4 wires on the D5s from the RangRover, the water pump wires come from internally in the heater.
I cut the OEM plug and just used two xt30 connectors
Red and brown battery + and v-
Other 2 are, green is the +signal wire going to the fuel pump the other...
I'm with Wookie on this, no way would I trust to sleep in the camper or just leave the Chinese heater running without being there with it , Ebers I trust 100% and happy to sleep with it running.
Edit to add
Bought a as new D5s water heater from a newish RangRover (30quid ebay special) bought...