year ago i was a fork lift engineer so a tip ...
when lifting a fork lift, one way is to tilt the mast as far back as poss then under the mast end put a piece of hard wood like oak or somesuch then tilt forward the mast will then lift the fork lift a small amount, block under the body, then...
Surely it would be better and more cost effective to use the electric to pump the water back up to the top hydo reservoirs in the day as alot of wind farms are on hill side anyway rather than at night because if the wind is not needed neither would the turbines be needed, but they can give the...
A short term fix is to pour your own hot water in whilst it is filling I made 9KG hover, hot fill but IMO it still doesnt fill enough even though I have adjusted its pressure switch, so if filling to max weight I also put a watering can in of hot water as well as the hot fill because it tops...
element could have built in thermo switch coz that is where it needs to be ? just take it out connect 230 across it for a second or two and see if it gets warm.
Dont think you will have any problems used to cost lot less than bore n pistons,it used to be the fix if using worn bores back in the day, to use next size up rings, and gap them down to suit the worn or should I say the re-honed bore. After all its only a stationary engine not like it will...
both of the boxes 40a and 30a have the same lidle number 327358 that is what the lidle guy said when i called them
has this actually been done yet or is it just hearsay ?
Wind farms paid £100m to switch power off
https://www.telegraph.co.uk/news/2018/01/08/wind-farms-paid-100m-switch-power/
and Dirty power
http://www.windaction.org/posts/46115-dirty-electricity-and-wind-power#.XllB2Kj7SUk
https://www.electricalpollution.com/windturbines.html
Also the power...
My son work for money supermarket and they now have two charging points I think, WOW thats coz md has a tesla:laughing: there are 200 employees thats a fair share isnt it?:whistle: now if everyone want to charge their car, will the site have enough power to charge 200 cars and work the offices...
clutch is quite esay on a mini actually if you have the flywheel puller and they are easy to make done loads, but I am talkin about real minis not modern pigs
well according to grunfos that is exactly what they are
The Grundfos UPA 15-90 N is a small stainless steel circulator pump, designed for water pressure boosting in domestic properties to provide additional pressure to hot and cold water taps and similar outlet points. The UPA 15-90 N is mainly...
well all I can say is a mate fitted one to his system coz he had one sitting there to test it and it worked a treat he then replaced it with a similar pump to this
9 M head stainless body
GRUNDFOS UPA 15-90N (160) DOMESTIC HOME BOOSTER 240V INC BRASS UNIONS
SKU
59539509
VATOUR PRICE£128.00...
You could try a inexpensive central heating pump in the feed from header to the tank, put it on a flow switch... eventually, but first just plumb it in, on a on off to see if it improves things, should give around 6M head which would improve the flow considerable and only cheap and quiet. a...
my post
exactly, amazing the difference just too much drag even the load of the piston rising against the exhaust valve pressure is a load with thick oil thrown in the equation.
was in reply to turbo's post re oil
exactly, amazing the difference just too much drag even the load of the piston rising against the exhaust valve pressure is a load with thick oil thrown in the equation.
I have just gone through all this at mine i have a low voltage power shower the pump is in the box on the wall in shower cubical and had all kinds of issues with it because the head of water being a bungalow solenoid valves etc need a minimum pressure to work etc and with the shower head left on...