Hi guys
my 195 has a problem with the gas, when the trigger is pressed a puff of gas is heard then it drops off, when i pulled the pipe off the reg its pumping out a goodun.
any ideas?
This is my home made tool for winding back the pistons of rear brake callipers on typically Volkswagen vehicles.
As you can see its simply an M10 x 100mm bolt, large washer, 2 M10 nuts, piece of 1/8th plate and 2 M6 set screws.
For smaller/larger pistons the washer with nut welded onto it...
ever wondered what some of the technical terms within your Haynes manual actually mean? well here's a quick guide...
Haynes: Rotate anticlockwise.
Translation: Clamp with mole grips (or an adjustable spanner) then beat repeatedly with hammer anticlockwise. You do know which way is...
2 black, 2 white and 2 silver for me today, will use the black for my rollcage on the autograss car when its done.
cheers for letting us know about the paint.
can you not get some thin steel to go inside the formers to take up the slack?
probably a good heat first to shape.
may not work but might be worth a shout.
i have just bought a 12 ton version of this
to bend my rollcage pipe.
however it has not come with instructions as to what the different holes are for that the rollers go into.
ok it may be obvious but it has me a little baffled!!!
High quality Bosch metal cutting angle grinder discs. Suitable for all 230mm (9") angle grinders.
Thickness : 3.0mm
Diameter : 230mm
Bore : 22.2mm
they are around a quid :clapping:
if you know a friendly plumber who uses 1 1/2" pvc solvent weld waste pipe, used for sinks, you could borrow a selection of bends from him and purchase a length of pipe to cut up between bends, the fittings can be fitted and removed without damage and then the only cost would be the length if...
Got back to the car tonight to start a little filling of holes in the front valance, first time proper welding in years so hope i don't get slated too much for the welding!!!
I have a sealey supermig 195 with c02 outdoors.
Hi mate yes it's 1800 at mo but got 1600 to go i'n, I called Buxton today to enquire if I can use multipoint injection as u can't find a carb manifold anywhere and I can so happy days, just need a decent 4 speed box and job sorted, nice tidy cars you got there mate