Liquid Metal
Member
- Messages
- 482
- Location
- Essex, UK
Hi all, after picking some brains. I'm using a different set at work which appears to be set up in a different way to anything else ive used before, Until now have used various standard CV and synergic Mig sets Esab, Thermal arc, Murex, Kemmpi, and my favourite one to use which was a digital pulsed Fronius, lovely for welding staino or ally. Welded in various settings over the years from boilers and pipe, to sheet metal working, to seriously heavy structural steelwork, up to 100mm thick plate, so do have a bit of an idea what im up to lol
Now setting the wire vs voltage isnt the issue, wether its 2mm profiles over head with a nice sizzling dip, or 20mm plate within a humming spray, this set welds so smoothly its lurvely, has crater fill controls and all sorts lol
Its the other functions on the set. It appears to have a memory function which is what baffles me. What im trying to figure out is how to set it so i can just turn what looks like a programs dial, to go between different voltage/wirefeed settings at the turn of a dial rather than having to balance out every time (lazy i know), also has a 3way switch inside with P1,2,3 which doesnt seem to do anything (curious as to what it does) along with the burnback and crater fill controls, and a two way switch on the front which going by the symbol is a pulse on/off toggle switch, but also does nothing. Both of these examples might just have been nackered though.
Its a Murex Transmig 413s, fitted with Transmatic 4x4 ESP feed unit shown below (sorry about pic, was taken in a hurry lol)
Have had a look online and can find absolutely nothing even remotely related to this feed unit!!!
Thanks in advance!!
Now setting the wire vs voltage isnt the issue, wether its 2mm profiles over head with a nice sizzling dip, or 20mm plate within a humming spray, this set welds so smoothly its lurvely, has crater fill controls and all sorts lol
Its the other functions on the set. It appears to have a memory function which is what baffles me. What im trying to figure out is how to set it so i can just turn what looks like a programs dial, to go between different voltage/wirefeed settings at the turn of a dial rather than having to balance out every time (lazy i know), also has a 3way switch inside with P1,2,3 which doesnt seem to do anything (curious as to what it does) along with the burnback and crater fill controls, and a two way switch on the front which going by the symbol is a pulse on/off toggle switch, but also does nothing. Both of these examples might just have been nackered though.
Its a Murex Transmig 413s, fitted with Transmatic 4x4 ESP feed unit shown below (sorry about pic, was taken in a hurry lol)
Have had a look online and can find absolutely nothing even remotely related to this feed unit!!!
Thanks in advance!!